The Panther Dynamics Blog

Ultimate Glory

I give glory to, acknowledge and remember God for this website. He enabled me to do all this and this website belongs to Him. Thank You!

Showing Tag: " procedural textures" (Show all posts)

Procedural wood progress

Posted by Marius Oberholster on Tuesday, April 21, 2015, In : Tips 
Hey all!

This has been a challenge for quite a few years now - creating good looking wood with procedural textures. Only these last two months have I really been given the results I wanted. Below are a few exampls on how this has progressed:







While the above ones are not horrible, they still don't quite get the look I really want. No, that is below:


(Fence from a current project)

The grass isn't even close to being done, but the fence is and I am very very pleased with it. GOD is so good!!
The wood...

Continue reading ...
 

Yay, it's up

Posted by Marius Oberholster on Wednesday, September 17, 2014, In : General 
Hey all!

The last post I did was on the other blog - about cast approx in the material options. Check it out!

Today I want to share with you something of an experiment for me - writing sound effects as well as music!
This is a fairly recent video I did for Cross Allegiance:


(Check out the rest of our videos on our YouTube channel - Editing done by Sterling C Franklin)

I was going for a spacy look with this one, because this is an abstract concept that translates into the natural. Basically, it com...

Continue reading ...
 

Custom brick texture - All procedural

Posted by Marius Oberholster on Friday, July 4, 2014, In : Quick Blog Tutorial 
Hey all!

Quick Blog Tutorial time again!

Recently, I saw someone having done their own brick texture and immediately I was wowed, because they did not use the typical brick texture, except maybe to color, but, the bricks were nicely rounded and so, yesterday, GOD challenged me to make one for the verse image below, showing a before and after of compositing for a post on the portfolio blog:


(recent verse image for Cross Allegiance, stop by our Facebook page too and give us a like)

As you can see, ...

Continue reading ...
 

Book is finally available

Posted by Marius Oberholster on Wednesday, November 13, 2013, In : The book 
Hey all!

It's been a very long time coming and it is finally finished!! Remember for the passed year or so, I worked on a book (~320 pages) on procedural textures, well folks, finished, uploaded and ready to be purchased!


The cover image was one of my first all procedural texture scenes that looked viable for the book and so it made the cover. It was my competition entry for the Blender Guru Perfect Holiday competition. This scene is not in the book, it is a demonstration of what you learn in t...

Continue reading ...
 

A bit of a face lift

Posted by Marius Oberholster on Tuesday, July 16, 2013, In : General 
Hey all!

I recently felt like the site needed a bit of a freshening up and I really wanted it to have a more warm feel, like that you get from wood and so, with GOD's help, got it!

It took a bit of work on Blender to get the wood (as always, procedural textures) the way I was satisfied with it, but it really turned out well. Feel free to download the background image and use it as a wallpaper!

I like the brown look overall, with mixes of blue here and there throughout the site. I think there can...
Continue reading ...
 

Bricks that go crack

Posted by Marius Oberholster on Wednesday, April 3, 2013, In : wip 
Hey all!

Been editing the book (yes, it is that far along, can you believe it?!) and along the way I've encountered some really strange paragraphs, lol. This morning was almost like an entire section. In the Ruin tutorial, I explain how to make cracks and how to add them to the ruin and I was reading this section and going "wha'?!", hahaha. Anyway, I thought let me just open Blender and work this section through and see what I get and I really liked the result, so I thought I'd play with it a ...
Continue reading ...
 

Preview

Posted by Marius Oberholster on Thursday, November 8, 2012, In : General 
Hey all!

Today I was working on the trees and got bored and so I made these instead by just messing around with the textures. Think they came out rather cool! I stuck with the circular theme, because it looked amazing. The top middle one was made first.



In the book, I will tell you how you can make this kind of thing with procedural textures, because many times you need an art piece for a scene (especially when doing architecture) and as a respecter of copyright, you won't just fling something ...
Continue reading ...
 

Started adding some color!

Posted by Marius Oberholster on Friday, November 2, 2012, In : wip 
Hey all!

Today's post is more a taste of the final (though merely, if even, a shadow):


The inside of the structures needed to have a different color to indicate a different material.

The Viewport (or 3DView as I prefer) can have different colors assigned. It can help you see, to a very limited degree imo, the overall look your scene may have when completed.
   While the branches of the ivies have been completed, the leaves are just at the starting point. While preparing for this tutorial I had cr...

Continue reading ...
 

Ivy is next!

Posted by Marius Oberholster on Thursday, November 1, 2012, In : wip 
Hey all!

What a mission! It was such a task to get this size of ivy in the scene. The generator works extremely well and it has nothing to do with the quality of the software. Blender rocks and the ivy generator too, but I was referring to getting it to render (Cycles is a bit more heavy duty than Blender Render, imo).

BUT! HE came through as usual and I added HIS suggestions to the book as well on how to get it going with a good look and proper detail.

For today's post, I made a clay render (fo...
Continue reading ...
 

Bricks now aged with recap

Posted by Marius Oberholster on Wednesday, October 31, 2012, In : Tutorials 
Hey all!

Can finally move on to something other than bricks, haha, sort of:



This is where I am leaving it alone from this point and moving on to the blocks' insides themselves, because as you can see, they are still as white as the day they were modeled, if not more so, hahaha.

Let's recap on how this went on (remember, all procedural textures, not even texture painting):

This was the firstly applying the bricks. It was a scale test before unwrapping the whole thing and separating the two section...
Continue reading ...
 

Run-off stains on the floor

Posted by Marius Oberholster on Tuesday, October 30, 2012, In : wip 
Hey all!

I took some time today to specifically look at some buildings and I saw that when there is a place that water flows down regularly, where it hits the ground or drips for a long time, there forms stains too, so I added some staining on the floor as part of the floor's aging, but I ran into some difficulties, because I wanted to do it my way, instead of listening to HIS way, but thankfully, it didn't take nearly as long as before for me to relent and do it HIS way.

This is the result of ...
Continue reading ...
 

Working on its age

Posted by Marius Oberholster on Wednesday, October 24, 2012, In : wip 
Heya!

Been working on a basic mask for the floor. This shows how it is progressing, from a top view (which you need to use while doing this, otherwise you don't have a clue as to what is where):



Basically, you can use gradient textures to make basic masks and I really do recommend them. I will also add though, that you will face some difficulty when it comes to coloring or boosting the brightness of the mask, without ruining it completely. I recommend adding a Brightness/Contrast one to make th...
Continue reading ...
 

Node system art

Posted by Marius Oberholster on Friday, October 12, 2012, In : General 
Hey all!

I have been working hard today, trying to figure out how to make an ivy leaf without a distort category in in Cycles's node system and oh snap was it hard!! HE helped me make two different shapes. One that looks more like a heart and the other that looks more like a weirdly shaped helmet. I think both shapes will look great for the Ivy Generator.

After finishing the shapes, I like looking at the surprise HE leaves in the node system. HE usually leaves some kind of image there to discov...
Continue reading ...
 

Free tip today: Factor versus Color

Posted by Marius Oberholster on Monday, October 8, 2012, In : wip 
Hey all!

In the node editor, you will find that when you have something like a Mix node, that there is a Factor input. This input can be altered in varying ways, by using a texture. But, every texture has both a Color and a Factor output, both of which have an effect on the Factor of that Mix node or other node having a Factor input.

The big thing here is to remember that the Factor and Color output is not always the same and can produce very different results:


(Left = with Color,  Right = with ...

Continue reading ...
 

Free wallpaper today, yey!

Posted by Marius Oberholster on Friday, September 28, 2012, In : Just for fun 
Hey all!

Didn't get any requests for this one, but I believe HE wants it shared. So, here it is. I had to modify it a bit, because the single mountain landscape, just didn't cut it. I added a few more and some mist as well as a few other things, but I really wanted to add as much photographic qualities as I possibly could to just give it that bit of a boost, including a vignette (it is that bright spot in the middle of most photos). Because this is a very bright scene, the appearance thereof w...
Continue reading ...
 

Just had to see if this still works in Cycles; it does!!

Posted by Marius Oberholster on Thursday, September 27, 2012, In : Tutorials 
Hey all!

Very excited about sharing this particular image. While working on the first part of the book, HE showed me how to add snow, using only the Blend texture. And that is also a tutorial in the first section.

Anyway, on Cycles it is now called the Gradient texture and I wondered if it would still respond similarly or possibly even better. While I wouldn't necessarily call it better, I definitely like the almost stylistic cartoony background approach to how this looks.

Hope you like it too:



T...
Continue reading ...
 

Slowly toasted for too long

Posted by Marius Oberholster on Monday, September 17, 2012, In : General 
Heya!

Finished the toast today. What a work-out with Cycles!
Here is the final toast:

Only rendered at 100 samples
(click for full-res version in new tab)

I have to say, I really enjoyed this project and I have learned quite a bit on Cycles. Particularly how to layer procedural textures. It was a blast. For the toasted color I think it is too black, but I tried getting it lighter (didn't wanna budge). Oh well. Would still look good as a prop for a scene's background, so in that sense I believe it ...
Continue reading ...
 

Flag tutorial is almost finished

Posted by Marius Oberholster on Monday, August 13, 2012, In : Tutorials 
Hey all!

I got the chance to work on the book again Saturday. This time on the flag tutorial and I am very very excited about the results so far!

I am still working on animation, but for static images the tutorial is about a page from finished. I want to include animation as this tutorial will then truly set the tutorial apart in proving that you can do a lot with procedural textures.

So far the tutorial covers how to use them with certain modifiers:
 - Subdivision Surface (making the displacemen...
Continue reading ...
 

Wood tutorial almost finished!

Posted by Marius Oberholster on Thursday, July 5, 2012, In : Tutorials 
Hey peoples!!

Thankfully I had the opportunity to work on the book again this week and managed to finish writing it and finishing the cover as well. It still needs to be checked and maybe more info added, but it's one tutorial away from the Blender Render section being completed!!! As with the other tutorials having a similar cover, this is completely procedural textures (using nodes and directly applied).

So without further ado, here is the cover of the wood tutorial:


It took quite a bit of wor...
Continue reading ...
 

Paul Personal Training!

Posted by Marius Oberholster on Tuesday, June 26, 2012, In : General 
My brother needed a personal logo for his group on FB.

I usually like to do the designing, but prefer it if the person actually gives me a sketch of what they want me to do and then just transform that into a final product. And that's what we have here.

My brother has very specific ideas about what he wants and so with such clients is essential that they give a proper example of what they want, and that way they can very easily be satisfied with the work.

In this case, he only requested that the...
Continue reading ...
 

Wood with procedural textures!

Posted by Marius Oberholster on Thursday, May 31, 2012, In : wip 
Wood is one of the most difficult textures I've had to try and make with only procedural textures, but I'm glad to announce there's a way to add knots to wood with grain distortion.

Though I only managed it yesterday (with a lot of grace), it looks cool so far and the actual tutorial should (prayerfully and hopefully) have a better result. The node system looks something like this:



This the result of above:

(Full res is HD; right-click > View Image)

I have a few things I would like to change, suc...
Continue reading ...
 

Texture painting!

Posted by Marius Oberholster on Thursday, May 17, 2012, In : Tutorials 
This is one of Blender's coolest feature imo. You can literally paint over objects in 3DView. So cool. Not overtly original or even that fancy, just the knowing you can is cool!

For this part of the book (now becoming a set of books, due to my PC's inability to handle the large file), I used the monkey mesh that comes with Blender. Very simple low res texture, but it definitely shows that you can achieve good results with this technique.

Here's the final:


I really had to up the contrast and brig...
Continue reading ...
 

Texture node section started!

Posted by Marius Oberholster on Friday, March 30, 2012, In : wip 
Heya everyone!!

I have started working on the Texture Nodes for Procedural Textures (quite a mouth full, lol). Anyway, just to show you what you can do, I made something that you can't do without using texture nodes (when using procedural textures). An old dingy wall with plaster and paint chipping off and the wall itself is cracked.

This is it:


Usually I would use normal for this, but since the normal setting didn't give me the depth I needed, I had to go for an alternate approach: actual displ...

Continue reading ...
 

Brand New Free Tutorial!!!

Posted by Marius Oberholster on Friday, February 24, 2012, In : Tutorials 
Heya peoples!!

Great news! I just finished a new free tutorial on Procedural Textures in Blender:
Procedural Textures - An Introduction

It features details on the cloud procedural texture as well as two tutorials on how you can apply them to create things you'd normally need to buy textures for or find online. This way, you can get smart, make your own and stand out. This is the cover:


Currently, it is only available through e-mail order due to it's size (~12 MB PDF), but absolutely worth it. You...

Continue reading ...
 
 

"For I testify unto every man that heareth the words of the prophecy of this book, If any man shall add unto these things, God shall add unto him the plagues that are written in this book:
And if any man shall take away from the words of the book of this prophecy, God shall take away his part out of the book of life, and out of the holy city, and from the things which are written in this book.
He which testifieth these things saith, Surely I come quickly. Amen. Even so, come, Lord Jesus.
The grace of our Lord Jesus Christ be with you all. Amen." Revelation 22:18-21

"Add thou not unto his words, lest he reprove thee, and thou be found a liar." Proverbs 30:6

King James Version, Public Domain

About Me


Marius Oberholster Hey! I've been doing this full-time since July of 2011. It has been an incredible learning experience, not only learning how Blender works (still learning), but also about Open-Source and the incredible software available. ----------- This Blog will be a way to stay up to date on all things Panther Dynamics as well as some personal stuff as well.

LivingWaters movies:

The Living Waters ministry kindly allow people to post these, so you too may benefit from them! :D
GOD Bless you! Please share these!

Wanna see more, check out the portfolio:

Make a free website with Yola